to Metals
to Steels and cast irons

Tool and die steels

Dr. Dmitri Kopeliovich

Tool and die steels are high carbon steels (either carbon or alloy) possessing high hardness, strength and wear resistance.

Tool steels are heat treatable.

In order to increase hardness and wear resistance of tool steels, alloying elements forming hard and stable carbides (chromium, tungsten, vanadium, manganese, molybdenum) are added to the composition.

Designation system of one-letter in combination with a number is accepted for tool steels.

The letter means:

Chemical compositions of some tool and die steels
Properties of some tool and die steels

W - Water hardened plain carbon tool steels

Applications: chisels, forging dies, hummers, drills, cutters, shear blades, cutters, drills, razors.

Properties: low cost, very hard, brittle, relatively low hardenability hardenability, suitable for small parts working at not elevated temperatures.

to top

O, A, D - Cold work tool steels

Applications: drawing and forging dies, shear blades, highly effective cutters.

Properties: strong, hard and tough crack resistant.

O -Oil hardening cold work alloy steels;

A -Air hardening cold work alloy steels;

D -Diffused hardening cold work alloy steels;

to top

S – Shock resistant low carbon tool steels

Applications: tools experiencing hot or cold impact.

Properties: combine high toughness with good wear resistance.

to top

T,M – High speed tool steels (T-tungsten, M-molybdenum)

Applications: cutting tools.

Properties: high wear heat and shock resistance.

H – Hot work tool steels

Applications: parts working at elevated temperatures, like extrusion, casting and forging dies.

Properties: strong and hard at elevated temperatures.

to top

P – Plastic mold tool steels

Applications: molds for injection molding of plastics.

Properties: good machinability.

to top

Chemical compositions of some tool and die steels

AISI No.	C, %	Mn,%	W,%	Si,%	Cr,%	Mo,%	V,%	Co,%
W1	1.0	0.35	0.30	-	-	-	-	-
O1	0.95	1.1	0.5	0.30	0.5	-	-	-
A2	1.0	0.30	-	0.30	5.0	1.0	-	-
D2	1.55	0.30	-	0.30	12.0	1.0	-	-
S1	0.5	0.30	2.5	0.30	1.5	-	-	-
T15	1.6	0.30	12.0	0.30	4.0	-	5.0	5.0
M2	0.9	0.30	6.0	0.30	4.0	5.0	2.0	-
H13	0.35	0.40	-	1.0	5.0	1.5	1.0	-
P20	0.4	1.5	-	0.4	1.9	0.2	-	-

to top

Properties of some tool and die steels

(Materials Data)

to top